Tissue Grinders
Chemglass Life Sciences Tissue Grinder, 10mL, Potter-Elvehjem, 13mm Dia Pestle, 75mm Chamber Lgth
Tissue Grinder, 10mL, Potter-Elvehjem, 13mm Dia Pestle, 75mm Chamber Lgth. Potter-Elvehjem style tissue grinder with a Stainless Steel /PTFE pestle and an un-ground mortar. The pestle's Stainless Steel rod is for use with an overhead stirrer but the accessory "T" handle can be easily attached to assist with manual grinding. Radial serrations in the lower portion of the pestle facilitate the delivery of homogenate into the cylindrical portion of the mortar.
Research Products International Corp Conical Shaped Tissue Grinder, 6 per Bag
Conical-shaped tissue grinder has cone that tapers from 8.2mm to 2.9mm with a rounded tip. Overall length is 21cm. Steam autoclavable to 250°F (121°C). Packaged 6 per case.
Ace Glass, Inc. 50ML TUBE ONLY 50ML TUBE ONLY
50mL glass tapered tube with a pouring lip, for use with a glass pestle (50974573) as a tissue grinder. The conical area of the tube is for initial grinding, and the cylindrical area is for final homogenization. Interchangeably ground to 0.1-0.15mm clearance. Capacity represents volume with pestle inserted.
Active Motif Dounce Homogenizer
Whether you are analyzing cell lysates by Western blot, or preparing chromatin for a chromatin immunoprecipitation (ChIP) experiment, the ability to obtain reliable results depends on accurate cell lysis. Active Motif's dounce homogenizer is ideal for preparation of cell lysates or chromatin, particularly if the cell and tissue samples seem to be resistant to lysis under normal detergent conditions. The dounce is available in two sizes for both small and large sample preparations. Each dounce is supplied with two pestles of different widths. One pestle fits tightly within the shaft of the dounce for maximum friction and cell disruption, while the other pestle has a looser fit and is ideal for generating a homogenous sample. Since the dounce homogenizer is made of glass it can easily be cleaned and sterilized between uses.
Chemglass Life Sciences Tissue Grinder, 15mL, Griffiths, All Glass, 15mm Dia Pestle, 95mm Chamber Lgth, 305mm OAL
Tissue Grinder, 15mL, Griffiths, All Glass, 15mm Dia Pestle, 95mm Chamber Lgth, 305mm OAL. The 15ml size has projections at the end of the pestle for coarse grinding, while the entire length of the chamber is precision ground.
Chemglass Life Sciences Tissue Grinder, 5mL, Tenbroeck, 10mm Dia Pestle, 65mm Chamber Lgth, #000 Rubber Stopper
Tissue Grinder, 5mL, Tenbroeck, 10mm Dia Pestle, 65mm Chamber Lgth, #000 Rubber Stopper. Are of the same design as the Potter Elvehjem style, but the pestle is hollow allowing the addition of ice water to keep samples chilled during the grinding process.
Chemglass Life Sciences Tissue Grinder, 5mL, Potter-Elvehjem, 10mm Dia Pestle, 65mm Chamber Lgth
Tissue Grinder, 5mL, Potter-Elvehjem, 10mm Dia Pestle, 65mm Chamber Lgth. Potter-Elvehjem style tissue grinder with a Stainless Steel /PTFE pestle and an un-ground mortar. The pestle's Stainless Steel rod is for use with an overhead stirrer but the accessory "T" handle can be easily attached to assist with manual grinding. Radial serrations in the lower portion of the pestle facilitate the delivery of homogenate into the cylindrical portion of the mortar.
Chemglass Life Sciences Tissue Grinder, 55mL, Potter-Elvehjem, All Glass, 25mm Dia Pestle, 125mm Chember Lgth
Tissue Grinder, 55mL, Potter-Elvehjem, All Glass, 25mm Dia Pestle, 125mm Chember Lgth. The rounded shape on the lower portion of the pestle progressively grinds the sample and the homogenate is produced as the sample is forced through the cylindrical section. Generally used with soft tissue such as brain and liver samples.